01
ACI-Compliant Construction
Mix designs, placement, finishing, jointing, and curing all per ACI 301, 302, and 318. Test reports delivered to the EOR on schedule.
4.9/5 from 127 verified reviews
Code-compliant flatwork for active sites
Sacramento's Trusted
Commercial Concrete Contractor
Commercial concrete in Sacramento has to satisfy three masters at once: the structural engineer who specified the slab, the building inspector who has to sign off, and the operations manager who can't afford to shut the site down for a week. We've been doing that balancing act for two decades on warehouses, loading docks, retail buildouts, ADA ramps, light-industrial floors, and tilt-up paving across the metro.
- ACI-compliant construction
- Verified FF/FL numbers
- Pour around active operations
- $2M GL, full workers' comp
- Permit & inspection handled
20+
Years in Sacramento
500+
Projects Completed
4.9★
Customer Rating
2yr
Workmanship Warranty
Code-compliant flatwork for active sites
Sacramento-metro specialty
About this service
Commercial Concrete done right in Sacramento, CA
Commercial concrete in Sacramento has to satisfy three masters at once: the structural engineer who specified the slab, the building inspector who has to sign off, and the operations manager who can't afford to shut the site down for a week. We've been doing that balancing act for two decades on warehouses, loading docks, retail buildouts, ADA ramps, light-industrial floors, and tilt-up paving across the metro.
Our commercial work runs to spec: PT slabs to engineer-specified tendon layouts, vapor barriers per ACI 302.2R, F-numbers verified with a dipstick, joint layouts coordinated with the rack layout the tenant is going to install on day one. We carry the right insurance, we follow OSHA on every site, and we handle the inspector relationship so you're not on the phone every Tuesday morning.
Where commercial really separates from residential is logistics — staging, traffic control, lift coordination, after-hours pours, and protecting in-place equipment. We schedule around your operation, not the other way around. Night pours, weekend pours, and phased pours so the loading dock keeps running are all part of the standard playbook.
What's Included
Every commercial concrete we build includes
These are the specifications and details we build in by default. Not upgrades. Not extras. Standard scope on every project.
02
F-Number Verified Floors
Warehouse and light-industrial floors are screeded with laser-guided equipment and verified for FF/FL flatness and levelness per ASTM E1155. Numbers documented, not promised.
03
After-Hours & Weekend Pours
We pour around your operation. Night pours, Sunday pours, phased pours that keep a loading dock running through replacement — schedule first, concrete second.
04
Vapor Barrier Per ACI 302.2R
All slab-on-grade interior floors get a 15-mil vapor barrier per current ACI guidance, with proper lap seal and penetration boots. Cheap 6-mil poly is not what gets used.
05
Permit & Inspection Coordination
We pull the permit, schedule the inspector, and walk the inspection. Our project manager is on every inspection call — your facility manager doesn't have to be.
06
Traffic Control & Site Logistics
Pump truck staging, mixer queueing, lane closures, cone layouts, and pedestrian protection are planned before mobilization. No surprises on pour day.
Our Process
How we deliver commercial concrete
- 01
Pre-Construction Walk
Review drawings, walk the site, identify staging, pump access, conflict with existing operations, and the inspection points. Pre-pour meeting with GC and EOR if required.
- 02
Submittals & Mix Approval
Mix designs, vapor barrier specs, reinforcement steel certificates, and form release materials are submitted for approval before mobilization.
- 03
Form, Reinforce, Prep
Forms set, vapor barrier installed and lap-sealed, reinforcement placed and tied per drawings. Pre-pour inspection scheduled and walked.
- 04
Pour, Finish, Joint
Concrete placed per the approved sequence. Power-trowel finish to spec, joints sawed within 4–8 hours, surface tested for FF/FL where required.
- 05
Cure, Test, Hand-Off
Cured per spec (compound, wet, or sheet). 7- and 28-day cylinder breaks documented. Final walk with the GC and the inspector. Punch list closed within 2 weeks.
Technical Specifications
The numbers behind every commercial concrete we pour
Most contractors won't publish their specs. Ours are below — what we build to, every time.
- 01Concrete strength
- 4,000–5,000 PSI typical, project-specific
- 02Slab thickness
- 5–8 inches per engineer of record
- 03Reinforcement
- Per drawings — mesh, rebar, or post-tension
- 04Vapor barrier
- 15-mil per ACI 302.2R-15
- 05Flatness
- FF/FL verified per ASTM E1155
- 06Cure method
- Compound, wet, or sheet per spec
- 07Insurance
- $2M general liability, full workers' comp
- 08Workmanship warranty
- 2 years (project-specific terms available)
Commercial Concrete FAQ
Common questions
Specific to commercial concrete in Sacramento, CA
Do you carry the insurance and bonding for commercial work?
Yes. $2M general liability, full California workers' compensation, and we can post performance and payment bonds for projects that require them. Certificates of insurance with your specific additional insureds are issued at contract signing.
Can you pour around an active facility?
That's most of what we do. Night pours, weekend pours, phased pours that keep one loading dock open while the other is being replaced, and isolation of the work area with traffic control are standard. We plan around your operation in the pre-construction walk.
What's the lead time for a commercial pour in Sacramento?
From signed contract to mobilization is typically 2–4 weeks for projects under 5,000 sq ft, 4–8 weeks for larger projects requiring engineered mix designs, submittals, and inspections. Emergency pours (failed inspection, equipment-down situations) we can usually mobilize within 5–7 days.
Do you guarantee FF/FL numbers for warehouse floors?
Yes when the spec calls for them. We screed with laser-guided equipment, finish with riding power trowels, and verify with a dipstick walking the spec'd inspection layout. Reports go to the EOR. We will not contract to a number we can't reliably hit.
Can you handle the permits and inspections?
Yes. We hold the relationship with the City of Sacramento Building Division and Public Works, and we pull permits in jurisdictions across the metro (Elk Grove, Roseville, Folsom, West Sacramento, Davis). Our project manager is on every inspection — your facility manager doesn't have to walk it.
Still have questions?
Call us directly — we're happy to answer anything about your commercial concrete project.
Call 877-542-9872Where We Provide This Service
Commercial Concrete across the Sacramento metro
West SacramentoElk GroveRancho CordovaRosevilleFolsomCitrus HeightsCarmichaelArden-ArcadeFair OaksRocklin
Sacramento County · Placer County · Yolo County
Related Services
Other concrete services we offer
Concrete Driveways
Long-lasting driveway installation, replacement & resurfacing.
Learn more
Stamped Concrete
Decorative stone, brick & slate looks at a fraction of pavers.
Learn more
Concrete Patios
Custom outdoor living spaces designed for California summers.
Learn more
Concrete Repair
Crack repair, slab leveling, resurfacing & joint restoration.
Learn more4.9/5 · 127 verified reviews
Ready to start your commercial concrete project?
Free on-site estimate, itemized written quote within 48 hours, and a real human on the phone — not a call center. Serving the entire Sacramento metro.